Home Knowledge base HYPERVSN SmartV Solo How to connect the SmartV Box to a network (LAN vs. Wi-Fi)? 
Knowledge base
Knowledge Base

How to connect the SmartV Box to a network (LAN vs. Wi-Fi)? 

The HYPERVSN SmartV Box can be connected to a network using a wired LAN (Ethernet) or wireless Wi-Fi (2.4GHz). A wired LAN connection is the primary and recommended method due to its higher stability and is required during initial activation. Wi-Fi allows for cable-free control but requires the SmartV Box and the phone to be on the same local network. 

Connecting using LAN (Ethernet) 

For wired connection of the SmartV Box follow the steps:

1. Connect an Ethernet cable from your router or network switch to the LAN port on the SmartV Box.

2. Connect your mobile phone or laptop to the same router’s Wi-Fi network.

3. Run the HYPERVSN App, log in, and tap Scan Network to find the Box.

4. Once detected, the serial number will appear with a “Not activated” status; select it and tap Activate.

5. Wait for the success message and tap Continue to proceed to layout setup and calibration.

Connecting using Wi-Fi

1. In the App, tap Add SmartV Box to Wi-Fi.

2. Press and hold the “V” button on the SmartV Box for 5–10 seconds until the Wi-Fi indicator blinks.

3. Tap Confirm in the app, select your Box’s serial number, and follow the onscreen instructions to select a network and enter the password.

Related Questions

Can’t find your answer?

Products

Technology

Solutions

Holograms for Event

Knowledge Base

Industries

Use Cases

Contact Us

Company

Partnership

INFORMATION

Contacts

Legal documents

Copyright © 2026 HYPERVSN. All rights reserved.

    • 4 Item in cart

    HYPERVSN 3D Catalog

    USD 1,200

    Qty

    Remove Item

    HYPERVSN 3D Catalog

    USD 1,200

    Qty

    Remove Item

    HYPERVSN 3D Catalog

    USD 1,200

    Qty

    Remove Item

    Cart Subtotal:

    USD 3,600
    View Card Checkout

    Request a Callback

    ☎️

      Demo Request form

        Support contact